NOTES ON DEVICE SAFETY
LSM 510
General / Regulations
B 40-051 e 07/98
1-3
1
NOTES ON DEVICE SAFETY
1.1 General
The LSM 510 laser scanning microscope, including its original accessories and compatible accessories
from other manufacturers, may only be used for the purposes and microscopy techniques described in
this manual (intended use).
The manufacturer will not assume liability for any malfunction or damage caused by any thing
other than the intended use of the LSM 510 or individual modules or parts of it, nor by any
repair or other service operation performed or attempted by persons other than duly
authorized service staff. Any such action will invalidate any claim under warranty, including
parts not directly affected by such action.
1.2 Regulations
Extensive knowledge of the hardware/the system is indispensable for safe operation of the LSM 510.
☞
Read these operating instructions and all device publications belonging to the system
conscientiously
before
operating the LSM 510! You can obtain additional information on the
hardware configuration delivered and on optional system extensions from the manufacturer or
via the service hotline.
The LSM 510 has been designed, built and tested in conformity with the standards DIN EN 61010-1
(IEC 1010-1) "Safety requirements for electrical instrumentation and control and laboratory
apparatus", and DIN EN 60825-1 (IEC publication 825-1) "Safety of laser equipment", and taking
relevant CSA and UL specifications into account.
As the system is largely operated via menus on a computer, you should be acquainted with the
principles of the operating system and its WINDOWS NT 4.0 graphical user interface. The respective
manuals are supplied together with the programs.
In accordance with WHO regulations, the LSM 510 is a device that belongs to laser hazard class 3 B.
WHO recommendations concerning health and industrial protection when handling laser devices
must be observed. The operator of the unit must also observe all and any relevant statutory
accident prevention regulations.
Summary of Contents for LSM 510 Inverted
