![background image](http://html2.mh-extra.com/html/zeiss/lsm-510-inverted/lsm-510-inverted_operating-manual_3312162112.webp)
OPERATION
Image Acquisition (Acquire)
LSM 510
4-54
B 40-51 e 07/98
4.5.4 Scanning
modes
Taking a simple configuration as an example, the sections below describe the procedure for acquiring a
single scanned image in single-channel presentation, using fluorescence and confocal imaging.
Requirements
Axioplan 2
MOT
Push in the silver slider (4-37/
8
) on the microscope tube as far as it will go.
Activate the "Axioplan Control" window by mouse click, or, if the window was closed before, call it
up again by clicking on the <Micro> button.
Continue as described in sections 4.5.2.1 and 4.5.2.2.
The specimen must have been positioned and focused by conventional eyepiece observation in
fluorescent or transmitted light.
Axiovert 100 M BP
Perform the settings in the same way as described for the Axioplan. Make sure that the sideport slider
(4-39/
2
) and VIS slider (4-39/
3
) are in the correct positions.
Scanning
Click on the <Scan> button in the main menu.
This opens the "Scan Control" window, in
which all necessary scanning parameters can
be set.
The first selection to be made is whether you want
to perform a
Line scan
Frame scan
Use ROI or
Z stack.
This selection will be made via the <Mode>
button, followed by activation of the desired scan
mode.
The following description is limited to the Frame
and Z modes. For "Line Scan", proceed in the
same way.
Fig. 4-54
Summary of Contents for LSM 510 Inverted
