Zeiss Crossbeam 550, Instruction Manual

Page: 130 / 136

11 Parts and Tools | 11.1 Consumables ZEISS
11 Parts and Tools
NOTICE
Risk of property damage: Spare parts and consumables
Using spare parts or consumables that are not provided by ZEISS can lead to property damage.
4
Only genuine spare parts and consumables supplied by ZEISS are to be used in servicing
the microscope.
4
Contact your ZEISS service representative for information regarding how to order spare
parts and consumables.
4
Unless otherwise authorized by ZEISS, all spare parts and consumables must be installed by
a ZEISS service representative.
11.1 Consumables
Required Parts/Tools Part Number
Schottky field emitter (gun) by DENKA 000000-0302-460
Aperture (single hole), 35 μm thin film 348520-0229-000
Anode aperture, 55 μm (40 nA High Resolu-
tion configuration) 348520-0621-000
Anode aperture, 90 μm (100 nA High Current
configuration) 348520-0580-001
Extractor aperture 348520-0097-001
Anode aluminum seal 348520-0266-001
Copper seal gun head (single use) 000000-0546-290
Tip seal for pre-vacuum pump BOC Edwards
XDS 10 000000-0113-989
Scintillator for SE detector 348306-8142-000
Ion source (gallium) 360100-0000-540
With GIS upgrade: Precursors On request
11.2 Spare Parts
Required Parts/Tools Part Number
Chamber door O-ring 000000-0476-960
11.3 Tools and Accessories
Required Parts/Tools Part Number
Faraday cup 348342-8055-000
3 mm Allen key 000000-0015-247
130 Instruction Manual ZEISS Crossbeam 550L, Crossbeam 550 | en-US | Rev. 3 | 349500-8122-000