ZEISS
9 Shutdown and Disposal | 9.2 Transport and Storage
NOTICE
Risk of property damage: Damage during transport
Sensitive components of the microscope can get damaged during transport.
4
The microscope may only be transported in air-suspended vehicles.
4
Moving parts must be secured during transport to prevent them from slipping or tipping
over.
4
Install shock/tilt watches.
4
Avoid rocking the crates back and forth.
4
Devices for transporting the microscope must be rated to handle its full weight and dimen-
sions. Note the weight information on the package and on the shipping document.
4
Check that none of the items has been damaged during shipment.
4
Otherwise contact your local ZEISS service representative.
Packaging of the Microscope
The microscope is delivered in two wooden crates:
§
Microscope plinth
Wrapped with recyclable polyethylene-foil and shipped in a reusable wooden crate.
Dimensions and weight of crate:
1550 × 1550 × 2200 mm³ (W × D × H), appr. 1300 kg
§
Microscope console and accessories
Console, valve, damper, monitors, cables, pipes etc. are wrapped with recyclable polyethyl-
ene-foil or packed in separate cartons and shipped in a reusable wooden crate.
Dimensions and weight of crate:
1720 × 1100 × 980 mm³ (W × D × H), appr. 300 kg
Guidelines for Unpacking the Microscope
Due to the heavy weight of microscopes, a forklift has to be used to remove the microscopes
from the wooden crate:
§
The forklift used must have a sufficient load capacity.
§
Refer to the weights of the microscope stated in this chapter.
Guidelines for Transporting the Unpacked Microscope
A hand pallet truck has to be used to move the microscope:
§
Ensure all hallways and corners are wide enough to be passed with the hand pallet truck.
Instruction Manual ZEISS Crossbeam 550L, Crossbeam 550 | en-US | Rev. 3 | 349500-8122-000
109
Summary of Contents for Crossbeam 550
Page 135: ......
