YOKOGAWA wt3000 User Manual Download Page 61

Page: 61 / 384

2-35

IM 760301-01E

App

Index

Faunctional Description

2.11 Saving and Loading Data and Other Functions

Storing and Recalling «For procedures, see chapter 8.»

The numeric data and waveform display data can be stored in the internal memory. The

data is stored at the data update rate or a specified time interval to the internal memory.

Data stored to the internal memory can be saved on a PC card. The data that is saved to

the PC card cannot be recalled.

Saving and Loading from the Storage Medium «For procedures, see chapter 12.»

The WT3000 comes standard with a PC card drive. A USB port (peripheral devices) is

also available as an option. The numeric data, waveform display data, waveform

sampling data, screen image data, and setup parameters can be saved to a PC card or

USB memory. The saved setup parameters can be loaded as necessary. The screen

image data can be pasted to documents on a word-processing application.

PC card

USB memory

WT3000

Save

Load

Save

*1 Applies only to advanced computation (/G6 option)

*2 Numeric display data cannot be saved to binary format.

*3 Data acquisition via the Ethernet/GP-IB/RS-232/USB interface

*4 Data retrieval via the storage medium

*5 The software program can be downloaded by accessing the Download and Support page from the following URL.

http://www.yokogawa.com/tm/

Offline

Online

Offline

WT Viewer

Binary format

(*.wta)

Microsoft Excel

CSV format

(*.csv)

File reader

software

Binary format (*.wvf)

Waveform display data

Waveform sampling data

Float format

Numeric display data (*.wtd)

Waveform display data (*.fld)

Waveform sampling data (*.fld)

ASCII format (*.csv)

Numeric display data
Waveform display data

Waveform sampling data

Numeric display data
Waveform display data
Waveform sampling data

Recall

Store

Internal memory

Save

PC card/USB storage

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 61 / 384

Search results

Summary of Contents for wt3000

Reviews: