manualshive.com logo in svg

YOKOGAWA wt3000, User Manual, Page: 173 / 384

Share
Download
YOKOGAWA wt3000 User Manual Download Page 173

5-37

IM 760301-01E

1

2

3

4

5

6

7

8

9

10

11

12

App

Index

Power Measurement

Explanation

For functional details, see section 2.6.

To perform integration, the integration mode and integration time must be set before

starting the operation.

• Selecting the Integration Mode and Setting the Integration Timer

If the integration mode is set to normal integration and the integration timer is set to

00000:00:00, the integration is performed in manual integration mode.

For a description of starting, stopping, and resetting the integration and other items, see

section 5.11.

Note

Integration cannot be started, stopped, or reset in measurement modes other than normal

measurement mode.

5.12  Setting the Manual Integration

Summary of Contents for wt3000

































































































































































































































































































































































































Reviews:

No comments