YOKOGAWA wt3000 User Manual Download Page 263

Page: 263 / 384

9-16

IM 760301-01E

• Relationship between the Waveform Sampling Data That Can Be Saved and

Measurement Modes

There are limitations on waveform sampling data that can be saved depending on

the measurement mode as indicated below:

FFT2

FTT1

Yes

Math2

Yes

Math1

Yes

Torque

Yes

Speed

Yes

FFT

Waveform Computation

Waveform Display Data

Measurement Mode

Yes

*1 Applicable only to products with the motor evaluation function (motor version).

*2 Applicable only to products with the advanced computation (/G6 option).

Yes

• Selecting the Data Type

Select the data type from below. The extension is automatically added.

• Binary

• The following two files are created in the directory.

• Waveform display data file (.wvf)

• ASCII header file (.hdr)

• Waveform display data is saved in binary format.

• For details on the ASCII header file, see appendix 3.

• Neither file can be loaded into the WT3000.

• ASCII

• Saved in ASCII format.

• The file can be used on your PC for analysis.

• The file cannot be loaded into the WT3000.

• Float

• Saved in 32-bit floating format.

• The file cannot be loaded into the WT3000.

9.3 Saving Setup Parameters, Waveform Display Data, Numeric Data, Waveform Sampling Data

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 263 / 384

Search results

Summary of Contents for wt3000

Reviews: