YOKOGAWA wt3000 User Manual Download Page 268

Page: 268 / 384

9-21

IM 760301-01E

App

Index

Saving and Loading Data

• Setting Comments

Press the

Comment

soft key. A keyboard appears.

Use the

keyboard

to enter the comment.

For keyboard operations, see section 3.14, “Entering Values and Strings.”

• Selecting the Storage Medium and Directory

Press the

File List

soft key to display the File List dialog box.

The procedure is the same as that given inin “Selecting the Storage Medium”

and “Selecting the Save Destination Directory” in section 9.3.

10.

Press

ESC

to close the File List dialog box.

9.4 Saving the Screen Image Data

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 268 / 384

Search results

Summary of Contents for wt3000

Reviews: