manualshive.com logo in svg

YOKOGAWA wt3000, User Manual, Page: 210 / 384

Share
Download
YOKOGAWA wt3000 User Manual Download Page 210

7-4

IM 760301-01E

• Turning ON/OFF the Trend Display Collectively

• Displaying the Trends Collectively

3.

Press the 

cursor keys

 to select All ON.

4.

Press 

SET

. All the buttons to the left of the trend symbols are highlighted, and

all the trend are displayed.

• Hiding the Trends Collectively

3.

Press the 

cursor keys

 to select All OFF.

4.

Press 

SET

. The highlighting of all the buttons to the left of the trend symbols is

cleared and the trends are no longer displayed.

• Turning ON/OFF the Trend One at a Time

3.

Press the 

cursor keys

 to select the trend symbol you wish to set.

4.

Press 

SET

. The button to the left of the selected trend symbol is highlighted,

and the corresponding trend is displayed. If the highlighting of the button is

cleared, the trend is no longer displayed.

Explanation

You can turn ON/OFF the trend display from trend 1 (T1) through trend 16 (T16). You

can assign measurement functions for which the trend is to be displayed to trend (T1) to

trend (T16) by selecting the trend display target (see section 7.3).

7.2  Selecting the Trend Data to Be Displayed

Summary of Contents for wt3000

































































































































































































































































































































































































Reviews:

No comments