YOKOGAWA wt3000 User Manual Download Page 42

Page: 42 / 384

2-16

IM 760301-01E

• Changing the Displayed Items

By selecting a displayed item, the numeric data value that is displayed at the position

can be changed.

Change the measurement

function of the third item

Change the element

of the third item

• Scrolling the Page

The numeric display consists of up to nine pages. The number pages varies

depending on the installed options and the number of displayed items. The displayed

items can be assigned for each page. The page can be scrolled to switch the page,

and the displayed items can be changed collectively.

Page bar

The current page is

highlighted.

Display example
Displays the voltage, current,
power, and power factor of
elements 1 to 4 on pages 1 to 4.

Page 1

Page 2

Page 3

Page 4

• Resetting the Numeric Display

If the number of displayed items is set to a value other than All, the display order of

measurement functions can be reset to a default order (1 default set).

Numeric Display Related to Harmonic Measurement «See the

Expansion Function

User’s Manual IM760301-51E.»

Single list or dual list can be displayed on models with the advanced computation (/G6)

or harmonic measurement (/G5) option.

2.4 Power Measurement

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 42 / 384

Search results

Summary of Contents for wt3000

Reviews: