YOKOGAWA wt3000 User Manual Download Page 41

Page: 41 / 384

2-15

IM 760301-01E

App

Index

Faunctional Description

2.4

Power Measurement

The measured data of voltage, current, power, and so on can be displayed by setting the

screen to numeric display. By dividing the screen into top and bottom halves, waveform

(section 2.7), trend (section 2.8), bar graph

(section 2.8), waveform computation

(section 2.9), and FFT

(section 2.9) can be displayed simultaneously.

*1 Only on models with the advanced computation (/G6) or harmonic measurement (/G5) option.

*2 Only on models with the advanced computation (/G6) option.

Display Resolution

The display resolution for voltage, current, active power, apparent power, reactive power,

and so on is 600000. When the range rating (rated value of the specified range) is

applied, the

function of voltage, current, active power, apparent power, reactive power,

and so on is set to the decimal point position and unit of the element with the lowest

display resolution of the target elements. For the display resolution during integration,

see section 5.13.

Numeric Display Related to Power Measurement «For procedures, see section 5.1.»

• Selecting the Number of Displayed Items

The number of items can be selected from 4, 8, 16, All, Single List,

and Dual List.

*3 Only on models with the advanced computation (/G6) or harmonic measurement (/G5) option.

• Example in Which Eight Items Are Displayed

Measurement function

Data

• Example in Which All Items Are Displayed

Element and wiring system

Measurement function

Data

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 41 / 384

Search results

Summary of Contents for wt3000

Reviews: