YOKOGAWA wt3000 User Manual Download Page 185

Page: 185 / 384

6-4

IM 760301-01E

• Turning ON/OFF the Display the Input Signal Waveforms Collectively

• Displaying the Waveforms Collectively

Press the

cursor keys

to select All ON.

Press

SET

. All the buttons to the left of the input signal are highlighted, and all

the waveforms are displayed.

• Hiding the Waveforms Collectively

Press the

cursor keys

to select All OFF.

Press

SET

. The highlighting of all the buttons to the left of the signal is cleared,

and the waveforms are no longer displayed.

• Turning ON/OFF the Input Signal Waveforms One at a Time

Press the

cursor keys

to select the input signal you wish to set.

Press

SET

. The button to the left of the selected input signal is highlighted, and

the corresponding waveform is displayed. If the highlighting of the button is

cleared, the waveform of that input signal is no longer displayed.

Explanation

Only the input signals corresponding to the installed elements are displayed. The

waveform display can be turned ON/OFF for those input signals. For models with the

motor evaluation function (motor version), the waveform display for Speed and Torque

input signals can be turned ON/OFF through this procedure.

6.2 Selecting the Waveform to Be Displayed

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 185 / 384

Search results

Summary of Contents for wt3000

Reviews: