YOKOGAWA wt3000 User Manual Download Page 258

Page: 258 / 384

9-11

IM 760301-01E

App

Index

Saving and Loading Data

• Executing the Save Operation

25.

Press the

Save Exec

soft key. The data is saved to the directory indicated by

Path=...... At the same time, the Save Exec soft key changes to the Abort soft

key.

• Aborting the Save Operation

26.

Press the

Abort

soft key to abort the save operation. At the same time, the

Abort soft key changes to the Save Exec soft key.

• Specifying the File to Be Displayed in the File List Dialog Box

The procedure is the same as that given in “Specifying the File to Be Displayed in the

File List Dialog Box” in section 9.6.

• Viewing the Properties

The procedure is the same as that given in “Viewing the Properties” in section 9.6.

9.3 Saving Setup Parameters, Waveform Display Data, Numeric Data, Waveform Sampling Data

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 258 / 384

Search results

Summary of Contents for wt3000

Reviews: