YOKOGAWA wt3000 User Manual Download Page 275

Page: 275 / 384

9-28

IM 760301-01E

• Specifying the File to Be Displayed in the File List Dialog Box

Press the

Filter

soft key to select Item or All.

•

If you select Item, the list of files corresponding to the file type (Setup, Wave, or

Numeric) that is specified for File Item in the File menu, in the directory selected in step

5, is displayed.

•

If you select All, the list of all the files in the directory selected in step 5 is displayed.

• Viewing the Properties

On the File List dialog box, press the

cursor keys

to select the file.

Press the

Property

soft key to display the file property window.

Press

ESC

to close the file property window.

• Selecting the File Attribute

10.

Press the

cursor keys

to select the file.

11.

Press the

Attribute

soft key. The attribute of the selected file changes to R or

R/W.

9.6 Specifying the File to Be Displayed, Displaying File Properties, and Selecting File Attributes

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 275 / 384

Search results

Summary of Contents for wt3000

Reviews: