YOKOGAWA wt3000 User Manual Download Page 200

Page: 200 / 384

6-19

IM 760301-01E

App

Index

Waveform Display

• Changing the Graticule

Press the

Graticule

soft key to select , , or .

Explanation

For functional details, see section 2.7.

• Selecting Whether to Interpolate the Display

When there are less than 500 points of sampled data on the time axis, the area

between the display points (rasters) is no longer continuous. This function interpolates

between the points to display the waveforms. You can select the measurement range

from the following:

•

: No interpolation is performed.

• When the area is not an interpolation area

• When the area is an interpolation area

•

: Linearly interpolates between two points.

• When the area is not an interpolation area

Connects the dots vertically.

• When the area is an interpolation area

6.7 Selecting the Display Interpolation and Graticule

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 200 / 384

Search results

Summary of Contents for wt3000

Reviews: