YOKOGAWA wt3000 User Manual Download Page 205

Page: 205 / 384

6-24

IM 760301-01E

• Selecting the Target Waveform for Cursor Measurement

• Selecting the Target Waveform for

Press the

Wave C1 Trace

soft key. A box used to select the target waveform

appears.

Press the

cursor keys

to select any of the elements/wiring units starting with

U1.

Press

SET

to confirm the new target waveform.

• Selecting the Target Waveform for Cursor x

Press the

Wave C2 Trace

soft key. A box used to select the target waveform

appears.

Press the

cursor keys

to select any of the elements/wiring units starting with

U1.

Press

SET

to confirm the new target waveform.

• Selecting the Movement Path of the Cursor

Press the

Cursor Path

soft key to display the Cursor Path menu.

Press any of the soft keys from

Max

Mid

to select the movement path.

• Moving the Cursor

Press the

Wave C1 +/Wave C2 x

soft key to set the cursor target to Wave C1 +,

Wave C2 x, or both Wave C1 + and Wave C2 x.

•

If you select Wave C1 +, the position of can be moved.

•

If you select Wave C2 x, the position of cursor x can be moved.

•

If you select both Wave C1 + and Wave C2 x, the two cursors can be moved without

changing the spacing between the two. The value of the digit being specified by Wave

C1 + changes.

Press the

cursor keys

to move the cursor.

6.9 Cursor Measurement

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 205 / 384

Search results

Summary of Contents for wt3000

Reviews: