YOKOGAWA wt3000 User Manual Download Page 241

Page: 241 / 384

8-16

IM 760301-01E

• Executing the Save Operation

19.

Press the

Memory to File Exec

soft key. The stored data is saved to the

directory indicated by Path=...... At the same time, the Memory to File Exec soft

key changes to an Abort soft key.

• Aborting the Save Operation

20.

Press the

Abort

soft key to abort the save operation. At the same time, the

Abort soft key changes to a Memory to File Exec soft key.

• Specifying the File to Be Displayed in the File List Dialog Box

11.

Press the

Filter

soft key to select Item or

All

• Viewing the Properties

11.

On the File List dialog box, press the

cursor keys

to select the file.

12.

Press the

Property

soft key to display the file property window.

13.

Press

ESC

to close the file property window.

8.5 Saving the Stored Data

Summary of Contents for wt3000

































































































































































































































































































































































































Search results

Summary of Contents for wt3000

Reviews:

YOKOGAWA wt3000, User Manual, Page: 241 / 384

Search results

Summary of Contents for wt3000

Reviews: