Yealink VC110, Administrator'S Manual

Page: 69 / 268

Configuring Network
57
Parameter DHCP Option Description
Address client's subnet.
Network Time
Protocol
Servers
42
Specifies a list of the NTP servers available to
the client by IP address.
Vendor-Specific
Information
43 Identifies the vendor-specific information.
Vendor Class
Identifier
60
Identifies the vendor type.
TFTP Server
Name
66
Identifies a TFTP server when the 'name' field
in the DHCP header has been used for DHCP
options.
Bootfile Name 67
Identifies a bootfile when the 'file' field in the
DHCP header has been used for DHCP
options.
For more information on DHCP options, refer to
http://www.ietf.org/rfc/rfc2131.txt?number=2131 or
http://www.ietf.org/rfc/rfc2132.txt?number=2132 .
To make the endpoint gather network settings via DHCP options, you need to contact
your network administrator to configure the DHCP server properly.
DHCP feature parameters on the endpoint are described below:
Parameter Description Configuration Method
DHCP
Enables or disables the endpoint
to obtain network settings from
the DHCP server.
Default: Enabled
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Remote Control
Web User Interface
Host Name
Configures the host name of the
endpoint.
Default: Blank
Note: When the endpoint
broadcasts DHCP DISCOVER
messages, it will report the
configured host name to the
Web User Interface