YASKAWA GA500 series, Programming, Page: 309 / 526

Parameter
Details
2
2.8 H: Terminal Function Selection
YASKAWA TOEPYAIGA5002A GA500 Programming 309
Note:
You cannot set values 90 to 96 for inverse output.
■
9F: DWEZ Disable
Setting Value Function Description
9F DWEZ Disable
Sets operation of the DriveWorksEZ program saved in the drive.
Note:
Set A1-07 = 2 [DriveWorksEZ Function Selection = Digital input] to use this function.
ON : Disabled
OFF : Enabled
■
101 to 19F: Inverse Input of 1 to 9F
Setting Value Function Description
101 to 19F Inverse Input of 1 to 9F Sets the function of the selected MFDI to operate inversely. To select the function, enter “ 1xx ” , where the “ xx ” is the function setting
value.
For example, to use the inverse input of E [ASR Integral Reset] , set H1-xx = 10E .
Note:
You cannot use inverse input for all functions. Refer to Table 2.49 for more information.
◆
H2: Digital Outputs
H2 parameters set the MFDO terminal functions.
■
H2-01 to H2-03 Terminal MA/MB-MC, P1-C1, P2-C2 Function Selection
The drive has four MFDO terminals. Table 2.54 shows the default function settings for the terminals.
Table 2.54 MFDO Terminals Default Function Settings
No. Name Default Function
H2-01
Term MA/MB-MC Function Selection
(Contact)
E Fault
H2-02 Term P1-C1 Function Selection 0 During Run
H2-03 Term P2-C2 Function Selection 2 Speed Agree 1
Refer to Table 2.55 to set H2-xx [MFDO Function Select] .
Table 2.55 MFDO Setting Values
Setting Value Function Reference
0 During Run 318
1 Zero Speed 318
2 Speed Agree 1 319
3 User-Set Speed Agree 1 319
4 Frequency Detection 1 320
5 Frequency Detection 2 320
6 Drive ready 321
7 DC Bus Undervoltage 321
8 During Baseblock (N.O.) 321
9 Frequency Reference from Keypad 321
A Run Command Source 322
B Torque Detection 1 (N.O.) 322
Setting Value Function Reference
C Frequency Reference Loss 322
D Braking Resistor Fault 322
E Fault 322
F
*1
Not Used 322
10 Alarm 322
11 Fault Reset Command Active 323
12 Timer Output 323
13 Speed Agree 2 323
14 User-Set Speed Agree 2 323
15 Frequency Detection 3 324
16 Frequency Detection 4 324
17 Torque Detection 1 (N.C.) 325
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV