5-1
Chapter 5.
FUNCTIONS
5 - 1
Data
■
Data types
The DCP32 supports the following data types.
For further details, see Chapter 7, Parameter Setup and Chapter 8, Program Setup.
Data
Parameters
Variable parameters
Table data
Setup data
PID parameters 1
Event configuration data
Program
Pattern
G.Soak (CH2)
PID set No. (CH2)
Time event
Tag
Pattern link
Cycle
PV start
Data that can be changed even in RUN mode
Data (e.g. event type)
Channel 1 control parameters of PID sets 1 to 8
Basic data that can be changed only in READY mode
Linearization table data
SP1, SP2 and time data
Time event 1 to 5 data
PID set No. data for use in channel 2 control
Event
Events 1 to 3 data
Channel 2 G.Soak ON/OFF data
PID set No. (CH1)
PID set No. data for use in channel 1 control
G.Soak (CH1)
Channel 1 G.Soak ON/OFF data
PV START ON/OFF data
Cycle count data
Pattern link destination program No. data
Eight numbers or alphabets (can be set on loader)
PID parameters 2
Channel 2 control parameters of PID sets 2-1 to 2-8
Variable parameters 2
Channel 2 data that can be changed even in RUN mode
Constant-value operation data
Data (e.g. SP, PID) of constant-value operation
