7-5
Chapter 7. PARAMETER SETUP
Handling Precautions
• For details on item Nos., see “7-3 Parameter Setup List” (pages 7-7 to 7-
44).
• When the “PARA key assignment item” setting is set to a value that does
not correspond to an existing item, that setting is ignored.
For example, though factory setting 1000 corresponds to “constant-value
operation data” 0 of base 1000, 0 does not exist, so the setting will be
treated an invalid data and will not be registered.
●
Operations by the PARA key
If you press the
PARA
key in the basic display state, registered individual items
are called up. Each press of the
PARA
key successively calls up (up to eight)
registered individual items. Only individual items to which valid assignment
settings have been registered can be called up.
PARA key operations are not limited by the setting of the “variable parameter
setup” LoC (key lock). PARA key operations are described in the figure shown
below.
Handling Precautions
When invalid assignments are registered to an individual item, that
item is skipped and the next registered item is displayed.
*
Items that can be changed: When these items are displayed blinking, the
setting values can be changed by the
↑
,
↓
,
→
and
←
key. The
ENT
key stores data to memory.
Items for reference:
These are displayed at all times.
Basic Display State
DISP key
PARA key
ENT key
ENT key
DISP key
PARA key
PARA key
ENT key
ENT key
PARA key
DISP key
PARA key
ENT key
ENT key
PARA key
DISP key
PARA key
ENT key
ENT key
DISP key
PARA key
PARA key
Max. 8 items
Display item by PARA
key assignment item 1
(blinking)*
Display item by PARA
key assignment item 1
(normal display)
Display item by PARA
key assignment item 2
(blinking)*
Display item by PARA
key assignment item 2
(normal display)
Display item by PARA
key assignment item 3
(blinking)*
Display item by PARA
key assignment item 3
(normal display)
Display item by PARA
key assignment item 8
(blinking)*
Display item by PARA
key assignment item 8
(normal display)
