7-4
Chapter 7. PARAMETER SETUP
7 - 2
How to Use The PARA key
Use the
PARA
key for calling up individual items in frequently changed parameters.
■
How to register functions to keys
Up to eight individual items in the parameter setup can be assigned to each
PARA
key. The assignment item must be registered to use this feature.
This feature allows you to call up individual items more easily in the following
order:
FUNC
key + the
PARA
key selection of setting group
→
individual item
matrix.
●
How to register assignment items
To register an assignment item, add the following base corresponding to the
setting group to the item No., and then set the resultant value to setup data
C55
to
C62
(
PARA
key assignment items 1 to 8).
●
Example
Let's register four individual items to the
PARA
key. If you press the
PARA
key
in the basic display state, the 1st to 4th individual items in the table below are
displayed successively. In this example, let's change the setting values.
The settings for registering these individual items are as follows.
Setup Data Setting “
SEt
”
Base
Setting Group
1000
Constant-value operation data
1500
PID parameters 1
2000
PID parameters 2
2500
Variable parameters
3000
Variable parameters 2
3500
Event configuration data
4000
Table data
4500
Setup data
Order
Item to Call by PARA key
1
Setup data
C01
2
PID parameter
P-2
3
Variable parameter
FL
4
Variable parameter
FASt
Remarks
This is produced by adding item No.1 of
C01 to setup data radical 4500.
This is produced by adding item No.11
of
P-2 to PID parameter radical 1500.
This is produced by adding item No.3 of
FL to setup data radical 2500.
This is produced by adding item No.20
of
FASt to variable parameter radical
2500.
No.
55
56
57
58
Item Code
[auxiliary
display]
C55
C56
C57
C58
Setting
Value
4501
1511
2503
2520
Item
PARA key
assignment item 1
PARA key
assignment item 2
PARA key
assignment item 3
PARA key
assignment item 4
