2-8
Chapter 2. NAMES & FUNCTIONS OF PARTS
FUNC + PARA
: Parameter setup keys
Press the
PARA
key with the
FUNC
key held down in
the basic display state to move to selection of the setting
group (major items) in the parameter setup state.
FUNC + PROG
: Program setup (programming) keys
Press the
PROG
key with the
FUNC
key held down in
the program operation mode in the basic display state to
move to the program setup (programming) state.
Press the
PROG
key with the
FUNC
key held down in
the program setup state to change the No. of the
program to be set up in ascending order.
FUNC +
↓
: Program No. change keys
Press
↓
with the
FUNC
key held down in the program
setup state to change the No. of the program to be set up
in descending order.
FUNC + CLR
: Program item delete keys
Press the
CLR
key with the
FUNC
key held down
during entry of settings in the program setup state to
clear the setting.
FUNC + ENT
: Segment insert/delete keys
Press the
ENT
key with the
FUNC
key held down at the
SP or time items in the program setup state to move to
the segment insert/delete screen.
↑
+ PROG
: Program copy keys
Press the
PROG
key with
↑
held down in the program
operation READY mode in the basic display state to
move to the program copy screen.
FUNC + CLR + DISP
: General reset keys
Press the
CLR
key and the
DISP
key with the
FUNC
key held down in the READY AUTO mode in the basic
display state to move to the general reset confirmation
screen.
■
Loader jack
This jack is for connecting the loader.
Objects other than the loader plug should not be inserted into this jack.
The loader jack is not isolated from internal digital circuits. Be sure to cap the
loader jack when it is not in use.
