2-6
Chapter 2. NAMES & FUNCTIONS OF PARTS
Category
Basic display state
Parameter setup
PARA key
Assignment item
setup
Function
To change the display
To switch the display channel
To change the program No. in ascending order
(in READY mode)
To change the program No. in descending order
(in READY mode)
To run the program
(in READY, HOLD, FAST modes)
To hold the program
(in RUN mode)
To reset the program
(in READY, HOLD, FAST, END modes)
To advance the program
(in RUN, HOLD, FAST modes)
To run the program fast
(in RUN, HOLD modes)
To execute manual operation
(in AUTO mode)
To execute automatic operation
(in MANUAL mode)
To start auto-tuning
(when not executing auto-tuning)
To cancel auto-tuning
(when executing auto-tuning)
To change values during manual operation
(when MV or SP is blinking)
Starts parameter setup. So, the controller enters
selection of setup group (major item).
(in basic display state)
To change the setup group (major item)
To fix the setup group (major item)
To move between individual items (minor items)
To start changing of individual item setting values
To end changing of individual item setting values
(while setting value is blinking)
To change individual item setting values
(while setting value is blinking)
To cancel changing of individual item setting values
(in basic display state)
To select setup group
To end parameter setup
To start changing assignment item setting values
(in basic display state)
To move to next item by assignment item, and start
changing setting values
To change assignment item setting values
(while setting value is blinking)
To end changing of assignment item setting values
(while setting value is blinking)
To start changing assignment item setting values
To end assignment item setup
Key operation
DISP
FUNC + DISP
PROG
↓
RUN/HOLD
PROG +
RUN/HOLD
PROG + DISP
FUNC +
→
A/M
AT
↑ ↓ ← →
FUNC + PARA
PARA
↑ ↓
ENT
↑ ↓ ← →
ENT
↑ ↓ ← →
PARA
DISP
PARA
↑ ↓ ← →
ENT
DISP
