manualshive.com logo in svg

Yamatake DigitroniK DCP32, User Manual

Share
Download
Yamatake DigitroniK DCP32 User Manual Download Page 19

2-1

Chapter 2.

NAMES & FUNCTIONS OF PARTS

2 - 1

Structure

The DCP32 comprises a body, console, case, standard terminal base and add-on terminal base.

Case

Console

Body

Standard terminal base

Contains 7-segment display, LEDs, 
operation keys and loader 
connector.

Contains console and electrical 
circuits.

Connectors for connecting power, input, output, event outputs, external 
switch inputs (4) and auxiliary outputs (options).

Add-on terminal base

Terminal for connecting external switch inputs (8 options), time event outputs (options) and 
CPL communications (options).
This base is not provided on models not supporting external switch inputs (8) and time event 
outputs.

Key lock screw
   Fixes the case to the body.

Key cover
   Cover for preventing erroneous operation.

Summary of Contents for DigitroniK DCP32









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands