Yamaha YZ250(P)/LC, Owner'S Service Manual

Page: 362 / 584

4-75
TRANSMISSION, SHIFT CAM AND SHIFT FORK
ENG
4. Install:
9
Spacer
1
NOTE:
9
Apply the lithium soap base grease on the oil
seal lip.
9
When installing the spacer into the crankcase,
pay careful attention to the crankcase oil seal
lip.
9
Install the spacer with its chamfered side
a
facing the crankcase.
3. Install:
9
Plain washer
1
9
Circlip
2
NOTE:
9
Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the plain washer
and gear
b
.
9
Be sure the circlip end
c
is positioned at axle
spline groove
d
.
2. Install:
9
2nd wheel gear (25 T)
1
9
4th wheel gear (24 T)
2
9
3rd wheel gear (23 T)
3
9
5th wheel gear (20 T)
4
9
1st wheel gear (27 T)
5
9
O-ring
6
To drive axle
7
.
NOTE:
9
Apply the molybdenum disulfide oil on the 1st,
2nd and 3rd wheel gears inner circumference
and on the end surface.
9
Apply the molybdenum disulfide oil on the 4th
and 5th wheel gears inner circumference.
9
Apply the lithium soap base grease on the O-
ring.
5NX-9-30-4C 6/5/01 4:26 PM Page 52