Yamaha YZ250(P)/LC, Owner'S Service Manual

Page: 410 / 584

5-23
CHAS
FRONT BRAKE AND REAR BRAKE
EC5A5911
Front brake hose
1. Install:
9
Brake hose
1
To brake hose holder
2
.
NOTE:
Before tightening the bolt (brake hose holder),
align the top
a
of the brake hose neck with the
brake hose holder bottom
b
. Then pass the
brake hose in front of the axle boss
c
and fit it
into the hose groove
d
so that the brake hose
does not contact the nut (wheel axle).
2. Install:
9
Hose cover
1
9
Plain washer
2
9
Bolt [hose cover (M8)]
3
9
Bolt [hose cover (M6)]
4
10 Nm (1.0 m•kg, 7.2 ft•lb)
16 Nm (1.6 m•kg, 11 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
4. Install:
9
Pin
1
9
Plain washer
2
9
Cotter pin
3
NOTE:
After installing, check the brake pedal height.
Refer to “REAR BRAKE ADJUSTMENT” section
in the CHAPTER 3.
3. Pass the brake hose through the cable
guide
1
, then through the guide
a
on the
protector
2
.
5NX-9-30-5A 6/7/01 2:00 PM Page 46