Yamaha YZ250(P)/LC, Owner'S Service Manual

Page: 208 / 584

3-38
ELECTRICAL/SPARK PLUG INSPECTION
INSP
ADJ
EC370000
ELECTRICAL
EC371001
SPARK PLUG INSPECTION
1. Remove:
9
Spark plug
2. Inspect:
9
Electrode
1
Wear/Damage
→
Replace.
9
Insulator color
2
Normal condition is a medium to light tan
color.
Distinctly different color
→
Check the
engine condition.
NOTE:
When the engine runs for many hours at low
speeds, the spark plug insulator will become
sooty, even if the engine and carburetor are in
good operating condition.
3. Measure:
9
Plug gap
a
Use a wire gauge or thickness gauge.
Out of specification
→
Regap.
4. Clean the plug with a spark plug cleaner if
necessary.
5. Tighten:
9
Spark plug
NOTE:
9
Before installing a spark plug, clean the
gasket surface and plug surface.
9
Finger-tighten
a
the spark plug before
torquing to specification
b
.
Spark plug gap:
0.5~0.6 mm (0.020~0.024 in)
Standard spark plug:
BR8EG (NGK)
20 Nm (2.0 m•kg, 14 ft•lb)
5NX-9-30-3B 6/5/01 4:06 PM Page 44