Yamaha RCX142, User Manual

Page: 83 / 450

4-
21
4
Operation
7. Mode configuration
Functions are switched with the
UPPER
and
LOWER
shift keys. The menu display changes
while this shift key is pressed.
Fig. 4-7-3 Shift keys
UPPER
LOWER
Fig. 4-7-4 Function switching
RESET TASK DIR VEL+ VEL-
↓ ↓ ↓ ↓
[F1] [F3] [F4] [F5]
∧
POINT DIRECT BREAK VEL++ VEL--
↓ ↓ ↓ ↓ ↓
[F6] [F7] [F8] [F9] [F10] ...when
UPPER
key is
pressed.
∨
STEP SKIP NEXT
↓ ↓ ↓
[F11] [F12] [F13] ...when
LOWER
key is pressed.
.
The “
>
” mark at the left end on the guideline shows that the
UPPER
key is pressed,
while the “
>
” mark shows that the
LOWER
key is pressed.
Some submenus have other menus for accessing the next hierarchical mode.
For example, pressing the
F 8
key in “AUTO” mode while holding down the
UPPER
key, switches to “BREAK” mode. Submenus relating to “BREAK” mode then appear.
As explained above, operation can proceed through each hierarchy by selecting the menu
items with the function keys. To return to the previous mode hierarchy, press the
ESC
key.
To return to a highest mode press
MODE
. The basic modes are then displayed on the
guideline, so select the desired basic mode by pressing the corresponding function key.
Refer to “Mode hierarchy diagram” on the next page for the entire mode hierarchy.
n
NOTE
• When the data is being edited such
as in “EDIT” mode, the
MODE
key
is inoperative. After pressing the
ESC
key to return the mode
hierarchy, press the
MODE
key.
• From here in this user's manual
the mode hierarchy status is stated
in the order as shown below.
First (highest) hierarchy >
Second hierarchy >
Third hierarchy >
Fourth hierarchy
Example: PROGRAM > DIR >
ERASE
The above example shows that the
current mode is entered by
selecting
F 2
(PROGRAM) from
the first hierarchy menu,
F 3
(DIR) from the second hierarchy
menu and
F 7
(ERASE) from
the third hierarchy menu.