Yamaha RCX142, User Manual

Page: 126 / 450

4-
64
Operation
4
10. “PROGRAM” mode
10.3.9 Creating a sample program automatically
This section explains the procedure of automatically creating a sample program for defin-
ing user function keys which can be used in “MANUAL” and “PROGRAM” modes.
[Procedure]
1) In “PROGRAM>DIR” mode, press the
F 15
(EXAMPLE) key to enter
“PROGRAM>DIR>EXAMPLE” mode.
A confirmation message appears on the guideline.
Fig. 4-10-27 Loading a sample program
PROGRAM >DIR>EXAMPLE <TEST1 >
No. RW/RO
1 TEST1 55 952 RW
2 *TEST2 50 907 RW
3 PARTS100 38 843 RW
4 TEST100 100 1968 RW
Overwrite FUNCTION OK?
YES NO
Name Line Byte
2) Press the
F 4
(YES) key to perform this operation.
A sample program will be automatically created under the program name
“FUNCTION”.
Press the
F 5
(NO) key if you want to cancel this operation.
3) Rewrite the contents of this program as needed.
User function keys can be customized with this program.
n
NOTE
Use caution when creating a sample
program automatically, since
previously defined user function data
will be rewritten.
n
NOTE
Refer to “10.2.6 User function key
display” for details on user function
keys. Refer to “10.6 Registering user
function keys” when registering user
function keys.