Yamaha RCX142, User Manual

Page: 123 / 450

4-
61
4
Operation
10. “PROGRAM” mode
10.3.5 Erasing a program
Unnecessary programs in the directory can be erased.
[Procedure]
1) In “PROGRAM>DIR” mode, use the cursor (
↑
/
↓
) keys to select the program to be
erased.
2) Press the
F 7
(ERASE) key to enter “PROGRAM>DIR>ERASE” mode.
A confirmation message appears on the guideline.
Fig. 4-10-22 Erasing a program
PROGRAM >DIR>ERASE
<TEST1 >
No. RW/RO
1 TEST1 55 952 RW
2 *TEST2 50 907 RW
3 PARTS100 38 843 RW
4 TEST100 100 1968 RW
Erase program OK?
YES NO
Name Line Byte
3) Press the
F 4
(YES) key to erase the selected program.
Press the
F 5
(NO) key if you want to cancel erasure.
After the program is erased, the lower program names move upward.
Fig. 4-10-23 After erasing a program
PROGRAM >DIR <TEST2 >
No. RW/RO
1 *TEST2 50 907 RW
2 PARTS100 38 843 RW
3 TEST100 100 1968 RW
4 TEST200 80 1525 RW
NEW
INFO
Name Line Byte
c
CAUTION
• Programs with an “RO (read
only) attribute cannot be erased.
When these programs must be
erased, change the attribute.
• To change the program attribute,
refer to “10.3.7 Changing the
program attribute”.