Yamaha RCX142, User Manual

Page: 276 / 450

4-
214
Operation
4
12. “SYSTEM” mode
12.4.2 Initializing the memory
This initializes the program, point data, shift coordinates, hand definitions and pallet defi-
nitions.
Before initializing, make sure that the currently input data is no longer needed.
[Procedure]
1) Press the
F 2
(MEMORY) key in “SYSTEM>INIT” mode.
Fig. 4-12-94 Initializing the memory
SYSTEM >INIT>MEMORY V8.35
Source(use/sum) = 1316/364580 bytes
Object(use/sum) = 528/ 98304 bytes
Sequence(use/sum)= 0/ 4096 bytes
Number of program = 5
Number of points = 124
PROGRAM POINT SHIFT HAND ALL
2) Select the item to initialize with the
F 1
(PROGRAM) to
F 7
(COMMENT)
keys.
A confirmation message appears on the guideline.
Fig. 4-12-95 Initializing the memory (program)
SYSTEM >INIT>MEMORY>PROGRAM V8.35
Source(use/sum) = 1316/364580 bytes
Object(use/sum) = 528/ 98304 bytes
Sequence(use/sum)= 0/ 4096 bytes
Number of program = 5
Number of points = 124
Initialize OK? YES NO
3) Press the
F 4
(YES) key to initialize the memory.
If not initializing, press the
F 5
(NO) key.
n
NOTE
• External data must be input to
restore the memory after it has
been initialized.
• The memory must be initialized if
damaged due to some kind of
problem.