Yamaha F200B, Service Manual

Page: 523 / 579

9-48
9
5. Push the brushes 7 into the holders,
and then install the armature 8 .
6. Install the wave washer 9 .
7. Install the stator
0
, and then tighten the
bolts
A
. NOTICE: Secure the end of
the armature shaft using a pair of pli-
ers, and then install the armature
along with the motor base assembly.
Otherwise, the armature could sepa-
rate from the motor base assembly
due to the magnetic force of the stator
0
and damage the brushes.
Installing the reservoir
Do not reuse an O-ring, always replace it
with a new one.
1. Install the spacer 1 , filter 2 , and sheet
3 .
2. Install a new O-ring 4 and the reservoir
5 , and then tighten the reservoir bolts 6
to the specified torque.
3. Install a new O-ring 7 and the reservoir
cap 8 , and then tighten the reservoir cap
8 to the specified torque.
Depth
b
(reference data):
0.95 mm (0.04 in)
b
6
6
6
7
7
8
9
0
A
5
4
2
1
8
7
6
6
3
PTT motor