Yamaha F200B, Service Manual

Page: 442 / 579

LOWR
Lower unit
8-79
Removing the propeller shaft
housing assembly
1. Remove the water pipe, cover, and bolts.
See steps 1 and 2 in “Removing the pro-
peller shaft housing assembly” (8-22).
2. Remove the propeller shaft housing
assembly.
Disassembling the propeller shaft
housing assembly
1. Remove the rubber seal. See step 1 in
“Disassembling the propeller shaft hous-
ing assembly” (8-22).
2. Remove the dog clutch. See “Disassem-
bling the propeller shaft assembly” (8-
16).
3. Disassemble the propeller shaft housing
assembly. See steps 2–5 in “Disassem-
bling the propeller shaft housing assem-
bly” (8-73).
4. Remove the oil seals and needle bear-
ing. See steps 3 and 4 in “Disassembling
the propeller shaft housing assembly” (8-
16).
Checking the propeller shaft housing
1. Check the water pipe. Replace if cor-
roded, deformed, or cracked.
2. Check the propeller shaft housing and
forward gear. See “Checking the propel-
ler shaft housing” (8-74).
Checking the propeller shaft
1. Check the propeller shaft. See “Checking
the propeller shaft” (8-74).
Assembling the propeller shaft
housing assembly
1. Install a new needle bearing and oil
seals. See steps 1 and 2 in “Assembling
the propeller shaft housing assembly” (8-
18).
2. Assemble the propeller shaft housing
assembly. See steps 2–10 in “Assem-
bling the propeller shaft housing assem-
bly” (8-74).
3. Install the rubber seal. See step 2 in
“Assembling the propeller shaft housing
assembly” (8-22).
Slide hammer handle 1 : 90890-06531
Puller head 2 : 90890-06514
1
2