Yamaha F200B, Service Manual

Page: 267 / 579

7-8
7
Removing the power unit
Make sure to reduce the fuel pressure before
removing the power unit. See “Reducing the
fuel pressure” (6-7).
It is recommended to loosen the flywheel
magnet nut before removing the power unit to
improve working efficiency. See “Removing
the flywheel magnet” (7-16).
1. Remove the flywheel magnet cover.
2. Remove the plastic tie
1
, and then
remove the rigging tube retainer
2
.
3. Remove the retaining plate
3
and rig-
ging grommet
4
.
4. Disconnect the battery cables
5
.
5. Remove the throttle cable
6
from the
holder
a
, and then disconnect the throt-
tle cable.
6. Remove the cable holder
7
, and then
disconnect the shift cable
8
.
7. Disconnect the fuel hose 9 from the fuel
filter.
8. Remove the PTT switch coupler
b
from
the bracket 0 , and then disconnect the
PTT switch coupler.
9. Remove the water detection switch cou-
pler
c
and isolator coupler
d
from the
bracket 0 .
1
2
3
4
5
6
a
8
7
9
Power unit assembly