Yamaha F200B, Service Manual

Page: 433 / 579

8-70
8
Removing the water pump and shift
rod
1. Remove the water pump housing, impel-
ler, Woodruff key, outer plate cartridge,
and gasket, and then set the gear shift to
the N position. See steps 1 and 2 in
“Removing the water pump and shift rod”
(8-13) and step 3 in “Removing the water
pump and shift rod” (8-9).
2. Remove the plate, oil seal, O-ring, and
shift rod. See step 2 in “Removing the
water pump and shift rod” (8-67).
Disassembling the water pump
housing
1. Disassemble the water pump housing.
See “Disassembling the water pump
housing” (8-9).
Checking the water pump and shift
rod
1. Check the water pump and shift rod. See
“Checking the water pump and shift rod”
(8-9).
Assembling the water pump housing
1. Assemble the water pump housing. See
“Assembling the water pump housing” (8-
10).
Water pump and shift rod (FL250G)