Yamaha F200B, Service Manual

Page: 507 / 579

9-32
9
Removing the clamp bracket
1. Remove the PTT unit. See “Removing
the PTT unit” (9-37).
2. Remove the anode
1
.
3. Remove the ground leads
2
and
3
.
4. Remove the self-locking nut
4
and
through tube
5
, and then disassemble
the clamp brackets
6
and
7
.
5. Remove the trim sensor
8
.
6. Remove the spring
9
, hook
0
, and pins
A
.
7. Remove the tilt stop levers
B
and
C
,
distance collar assembly
a
, collar
D
,
and bushings
E
.
Checking the clamp bracket anode
1. Check the anode. Replace if eroded.
Clean if there is grease, oil, or scales.
NOTICE: Do not apply grease, oil, or
paint to the anode.
Installing the clamp bracket
1. Assemble the distance collar assembly.
2
1
3
4
5
6
7
8
Distance
a
:
30.3–30.4 mm (1.193–1.197 in)
A
A
9
0
B
C
a
D
E
E
E
a
Clamp bracket and swivel bracket