5f1 - Novell NetWare 4.x, 5.x (NDS) Networks
assigned. If your printer services queues on multiple file servers, the Print Server name must be the
same on all file servers and the Print Server password must be the same on all file servers.
Configure NetWare Settings using Internet Services
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
button or Tab.
3.
Click the plus symbol (+) to the left of the
Protocol Settings
file folder.
4.
Select
NetWare
in the directory tree.
5.
The available selections include:
A Host Name (Print Server) Text box. (Use this name to create the Print Server on the NetWare
Server.)
A Mode selection box for Directory (NDS) or Bindery.
A Primary File Server name entry box (Bindery).
A Language Selection box (Japanese or English).
An Entry box for Queue Polling Interval (1 - 1000 seconds).
An Entry box for SAP frequency (1 - 100 seconds, with the ability to set to zero, which is off).
Two Password text boxes for logging into the NetWare Server.
Under the NDS Subject Label there is a text box for NDS Tree, followed by one for NDS Context.
A Frame Selection box, with a default of Auto sensing. Other selections include Ethernet II (used when
running TCP/IP on your network), Ethernet 802.3 (used for NetWare versions up to 3.11), Ethernet
802.2 (the default for NetWare 3.12 and later), and Ethernet SNAP (used on networks running TCP/IP
and/or AppleTalk).
A display of the Printer's Network (MAC) address.
A Service Location Protocol Enablement box. For use with NetWare 5 and newer versions, this protocol
helps to reduce service advertising network traffic.
6.
Either accept the default Host Name (Print Server) or type in a new name that matches the name used
on the Server.
7.
Select Directory (NDS) as your Mode.
8.
Enter in a polling rate for
Queue
Polling Interval
.
9.
Enter in a SAP (service advertising protocol) frequency, or set
SAP frequency
to zero (off).
10.
Type a
Password
for the Printer to log into the NetWare Server, and type it a second time for
confirmation.
11.
For NetWare NDS (NetWare Directory Services), type a directory tree and context (typeful name for the
Printer in the NDS environment). Note: Since there is no Browse function, you MUST manually enter in
this information. For example: O=xerox.OU=engineering.
12.
For Frame Selection, if in doubt, leave the setting at its Auto sensing default value.
13.
Click the
Apply New Settings
button, then click the
Reboot button
to reboot the Printer and apply
setting changes.
Select another Protocol
Go on to Step 6
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_5f1.htm (2 of 2) [9/4/03 8:32:49 AM]
Summary of Contents for WorkCentre M24 Color
