5a1 - TCP/IP LPD Enablement
5.
To exit the Settings screen, without making any changes, click the
Cancel
button (upper left-hand
button) on the touch screen.
Exiting the LPD Selections Menu
To exit the LPD Selections Menu, which returns you to the Port Settings Menu, press the rectangular
Close
button in the upper right corner of the touch screen.
Exiting the Port Settings Menu and returning to the Printer's Main Menu
1.
To exit the Port Settings Menu, returning to the Printer's Main screen, press the rectangular
Close
button in the upper right corner of the Port Settings Menu screen.
2.
Press the rectangular
Close
button in the upper right corner of the Ports and Protocols selection (two-
button) screen.
3.
Press the rectangular
Close
button in the upper right corner of the five-button screen containing the
Network Settings button.
4.
Finally, press the rectangular
Exit
button in the upper right corner of the four-button, System Settings
screen.
Note: If you changed any settings in the Port Settings menu, the Printer will automatically reboot to register and
enable your new settings.
Select another Protocol
Go on to Step 6
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_5a1.htm (2 of 2) [9/4/03 8:32:38 AM]
Summary of Contents for WorkCentre M24 Color
