6a3 - NetBIOS over IP Peer to Peer Printing
1.
From the
Start
menu, select
Settings
and then
Printers
.
2.
Right click on the Printer's icon and select
Document Defaults
.
3.
Select the correct paper size and any other default settings you wish to set for the printer.
An Alternate Procedure for Setting up NetBIOS over IP Peer to Peer Printing
EXPERIENCED SYSTEMS ADMINISTRATORS can use the following procedure:
1.
On NT4 workstations
, verify that the
TCP/IP protocol
is installed and that it is configured for
DNS
resolution
of the NetBIOS Host Name. Verify that BOTH Microsoft
TCP/IP Printing Services
and
Workstation
(SMB client) Services are installed.
2.
On Windows 2000 and XP workstations
, from the "Properties selection" of the "Local Area
Connection" icon, verify that the
Internet Protocol (TCP/IP)
is installed. Select the protocol and click
Properties
. Verify that TCP/IP is configured for use of the DNS Server. Click the
Advanced
button and
select the
DNS
Tab. Verify that the checkbox labeled "Register this connection's addresses in DNS" is
checked. Select the
WINS
Tab and verify that the NetBIOS setting is set to either "Use NetBIOS Setting
from the DHCP Server," or that "NetBIOS is enabled over TCP/IP." Click Cancel twice and verify that
the
Client for Microsoft Networks
is installed. Finally, with your Operating System Installer Disk
readily available, through
Add/Remove Programs
and
Add/Remove Windows Components
, select
Other Network File and Print Services. Click Details, check the box for
Print Services for Unix
, and
click OK and Next.
3.
On 95/98/Me workstations
, verify that the
TCP/IP protocol
is installed and that it is configured for
DNS resolution
of the NetBIOS Host Name. Verify that the
Client for Microsoft Networks
is installed
and that the workstation has a Computer (NetBIOS) Name and is a member of a Workgroup.
4.
Create an
LPR port
on your NT4, Windows 2000, or Windows XP Operating System. Use a Print Utility
(Spooler) program to create an LPR port on the Windows 95/98/Me workstation.
5.
When prompted for the "Name or address of server providing lpd" enter in the Printer's
SMB Host
Name
as seen on the Printer's Settings List.
6.
When prompted for a queue name, enter in your preference of an easily-identified name for this Printer.
7.
Install the Print driver on your workstation and, when prompted to select a port to print through, select
the LPR port that you just created.
8.
Print a Test Print to verify successful communications with the printer.
Select another Protocol
Go on to Step 7
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_6a3.htm (4 of 4) [9/4/03 8:32:43 AM]
Summary of Contents for WorkCentre M24 Color
