Changing the Administrator Password
Changing the Administrator Password
A10
There are two Administrator Passwords that control access to the Printer's feature settings. One password is a
numeric password that controls access through the Printer's Control Panel. The other password is an
alphanumeric password that controls access through the Printer's Internet Services (embedded HTTP server
application residing in the Printer).
To Change the Numeric Password on the Printer's Control Panel
1.
Press the rectangular
Access
button on the Printer Control Panel, located directly above and slightly to
the right of the numeric keypad.
2.
Press the
"1" key
on the numeric keypad five consecutive times. This is the factory default "password."
3.
Press the rectangular
Confirm button
on the touch screen.
4.
Press the
System Settings button
(the right-hand button of the two buttons displayed on the touch
screen). Note: If you press the left button by mistake, the Main menu will be displayed and you will have
to start over at step one above.
5.
Press the
System Administrator Password button
(the top right button displayed on screen).
6.
On the Password Setting screen, select the
On
button, which is the lower of the two vertically-aligned
buttons on the left side of the screen.
Note: If you select the upper Off button, you cannot access the password setting or password changing
functions.
7.
Using the Printer's numeric keypad, enter in a new numeric "password" ranging from 4 to 12 characters
in length.
8.
Press the
Enter
button (the lower right button) on the touch screen. Note: If you make a mistake, press
the
Reset
button located to the immediate left of the Enter button.
9.
Using the Printer's numeric keypad, enter in your new numeric "password" a second time and press the
Enter
button again.
10.
To exit the Password Setting screen, press the rectangular
Close
button in the upper right corner of the
screen.
11.
To exit the System Settings screen, press the rectangular
Exit
button in the upper right corner of the
screen. The Printer's Main Screen should now be displayed.
To Change the Alphanumeric Password used by Internet Services
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
button or Tab.
3.
In the beginning list of Hot Links in the Directory Tree on the left side of the Properties screen, click the
Internet Services settings
hot link.
4.
In the Administrator Name Text Box use your workstation's keyboard to enter in your desired
Administrator Name
. The factory default setting is "admin" (without the quotation marks).
5.
In the
Administrator
Password
Text box, enter in a
password
of up to 15 alphanumeric characters.
The factory default setting is "admin" (without the quotation marks).
6.
In the
Confirm Password
Text box, confirm your desired password by retyping it in the available box.
7.
To enable password protection for Internet Services, make sure that the Administrator Mode check box
is checked (enabled).
8.
Click the rectangular
Apply New Settings
button to have the Printer register your changes, or the
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/A10_Password.htm (1 of 2) [9/4/03 8:32:37 AM]
Summary of Contents for WorkCentre M24 Color
