6a1 - TCP/IP Peer to Peer (LPR) Printing
15.
Select
Not
Shared
unless the Printer is directly connected to your workstation and you wish to share it
with other network users. Click
Next
.
16.
Select
Yes
to print a Test Page.
17.
Select
Finish
and verify that the Test Page printed out at the Printer.
Configure the Print Driver
1.
From the
Start
menu, select
Settings
and then
Printers
.
2.
Right click on the Printer's icon and select
Document Defaults
.
3.
Select the correct paper size and any other default settings you wish to set for the printer.
Windows 95/98/Me Workstation Print Driver Installation
Before you start
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the CD-ROMs
that came with your Printer. They are also typically available for downloading in self-extracting Zip file format
from the Internet at
www.xerox.com
.
Verify that the TCP/IP Protocol is installed in the workstation
1.
At the Desktop, right mouse click the Network Neighborhood icon ("My Network Places" in Windows
Me).
2.
Left mouse click on
Properties
.
3.
Click on the
Configuration
TAB and verify that the TCP/IP Protocol has been loaded.
Note: If the TCP/IP Protocol has NOT been loaded, click the
Add
button, select
TCP/IP Protocol
from
the available list and click
OK
. If the setup program fails to find the required files, you will have to click
Have Disk...
to load the protocol from the Operating System installer disk for this workstation.
4.
Click on
TCP/IP Protocol
to highlight it, and click on the
Properties
button of the Configuration window.
5.
If using Dynamic TCP/IP Addressing, select the radio button for Obtaining an IP Address Automatically,
and supply the appropriate Server address information.
6.
If using Static TCP/IP Addressing, left mouse click on the radio button marked "Specify an IP Address"
to enable the manual configuration option.
7.
Enter in the required IP Address, Subnet Mask, and Gateway information for this workstation. For
smaller networks, the Windows default values for Subnet Mask and Default Gateway may be applicable.
Check with a QUALIFIED Network Administrator for Subnet Mask and Default Gateway requirements.
8.
Click
OK
.
Add the Printer to the Windows 95/98/Me Desktop
LPR Port Creation
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_6a1.htm (4 of 6) [9/4/03 8:32:41 AM]
Summary of Contents for WorkCentre M24 Color
