6a4 - NetBIOS over IP Client/Server Printing
Step 6
...continued
NetBIOS over IP Client/Server Printing
Before You Start
1.
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the CD-
ROMs that came with your Printer. They are also typically available for downloading in self-extracting
Zip file format from the Internet at
www.xerox.com
.
2.
Print a
Settings List
as stated under the
Network Connectivity Tab
of this guide.
3.
On the Settings List,
verify that "SMB" is enabled
. Also,
verify that TCP/IP is enabled
as one of the
supported protocols (NetBEUI may also be displayed). To enable "SMB," if required, follow the
procedure stated under the Microsoft (NetBIOS over IP) item of the NOS Selection menu, accessed
from the
Network Connectivity Tab
of this guide.
4.
The Workstation Print Driver Installation Procedures below ASSUME that you have already
Set Up an
NT Server to Queue Jobs to the Printer
. If you have NOT already set up the NT Server, for a quick-
step set up procedure, refer to the instructions supplied under the selection "Microsoft (NetBIOS over
IP)," located in the
NOS Selection
menu, under the
Network Connectivity Tab
of this guide.
Quick Find Printer Driver Installation for:
Windows 95/98/Me Workstation
Windows NT4 Workstation
Windows 2000 & XP Professional Workstation
Windows 95/98/Me Workstation Print Driver Installation
Verify that the Correct Protocols and Services are installed in the workstation
1.
At the Workstation's Desktop, right-click the
Network Neighborhood
icon ("My Network Places" in
Windows Me) and select
Properties
.
2.
On the
Configuration Tab
, verify that
Client for Microsoft Networks
is installed. If it is NOT, click the
Add
button, select
Client
, select
Add
, select
Client for Microsoft Networks
, and click
OK
. If the setup
program fails to find the required files, you will have to click
Have Disk…
to load the client from the
Operating System installer disk for this workstation.
3.
On the
Configuration Tab
, verify that the TCP/IP protocol is installed. If it is NOT, click the
Add
button,
select
Protocol
, select
Add
, select
TCP/IP Protocol
, and click
OK
. If the setup program fails to find the
required files, you will have to click
Have Disk…
to load the protocol from the Operating System
installer disk for this workstation.
4.
Click the
Identification Tab
and verify that this workstation has a UNIQUE Computer Name (15
characters maximum) and is a member of a workgroup (Workgroup is the default Windows workgroup
name).
5.
Click the
Configuration Tab
and select (highlight) the
TCP/IP Protocol
. Click the
Properties
button
and select the
NetBIOS Tab
. Verify that the checkbox labeled "I want to enable NetBIOS over TCP/IP"
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_6a4.htm (1 of 5) [9/4/03 8:32:44 AM]
Summary of Contents for WorkCentre M24 Color
