NetBIOS over IP Peer to Peer Printing
box. Enter the Domain in which this Host (Computer Name) resides into the "Domain" text box
(xerox.com, for example). In the boxes provided, enter the IP address of the DNS (Domain Name
Service) Server. Finally, click the
IP Address Tab
and verify that this workstation is using either a
dynamic or static method to obtain a valid TCP/IP Address.
Note: If you are operating a Windows Internet Naming Service Server on an NT only network, you may
wish to configure WINS instead of DNS by selecting the WINS Configuration Tab.
Add the Printer to the Windows 95/98/Me Desktop
1.
From the
Start
menu, select
Settings
and then
Printers
.
2.
Double click the
Add Printer
button and click
Next
.
3.
When the Add Printer Wizard displays, select
Network Printer
.
4.
Select
Browse
to search for the printer's
Workgroup
over the Microsoft network.
5.
Select the plus symbol (+) to the left of
Entire Network
to expand it if necessary.
6.
Double click the name of the
Workgroup
for the printer as shown on the Settings List. Select the
SMB
Host Name
as shown on the Settings List. Click
OK
, then click
Next
.
7.
When the Manufacturers and Printers window displays, select
Have Disk…
and enter in the path to
your driver files. Note that you can also use the
Browse
button to locate the required
.INF
file.
8.
Click
OK
on the "Open" screen, if you used the Browse button.
9.
Click
OK
on the "Install From Disk" screen.
10.
When the "Printers" list is displayed on screen, select your Printer. Click
Next
.
11.
When prompted, accept the default printer name, or give your printer a more descriptive name. Select
either Yes or No to make this printer your default Windows printer. Choose
Yes
if you will be printing
primarily to this printer from your Windows applications. Click
Next
.
12.
Print a Test Page
. Verify that it prints at the Printer.
13.
Click
Finish
.
Configure the Print Driver in Windows 95/98/Me
1.
From the
Start
menu, select
Settings
and then
Printers
.
2.
Right click on the Printer's icon and select
Properties
.
3.
Select the correct paper size and any other default settings you wish to set for the printer.
Windows NT4 Workstation/Server Print Driver
Installation
Verify that the Correct Protocols and Services are installed in the workstation
1.
At the Desktop, right mouse click the
Network Neighborhood
icon and select
Properties
. Click on the
Protocols
tab and verify that the
TCP/IP
protocol has been installed in the workstation.
Note: If the TCP/IP Protocol is not present in the Protocol list, click the
Add
button, select
TCP/IP
Protocol
from the available list, and click
OK
. If the setup program fails to find the required files, you
will have to click
Have Disk…
to load the protocol from the Operating System installer disk for this
workstation.
2.
After verifying that the TCP/IP Protocol is present, click on
TCP/IP Protocol
to highlight it, and click on
the
Properties
button of the Protocols window. If using Dynamic TCP/IP Addressing, select the radio
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/D7_NetBIOS_PeertoPeer.htm (2 of 4) [9/4/03 8:32:55 AM]
Summary of Contents for WorkCentre M24 Color
