Configure EtherTalk (AppleTalk)
Configure EtherTalk (AppleTalk)
N5.10
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
button or Tab.
3.
Click the plus (+) symbol to the left of the
Protocol Settings
file folder.
4.
Select
AppleTalk
in the directory tree.
5.
The available selections include:
- Printer Name.
- Zone Name.
6.
Enter the name that you wish to assign to this Printer. This is the name that will appear in the Chooser.
7.
Either accept the default zone of
*
which lets the closest router assign the Printer to a zone, or assign
the Printer to a zone (with a 32 character naming limit).
8.
Click the
Apply New Settings
button to accept changes, or the
Restore Settings
button to return
settings to their previous values.
NOTE: Changes to settings are not applied until you restart the Printer. A remote
Reboot
button is available on
the
Status Tab
of Internet Services.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/N5_10_ConfigETalk.htm [9/4/03 8:33:19 AM]
Summary of Contents for WorkCentre M24 Color
