Set the Ethernet Speed
Set the Ethernet Speed
N5.0
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
button or Tab.
3.
Click the first file folder in the Directory Tree labeled
Port Settings
.
4.
Click the
Ethernet
hot link.
5.
Select your network speed from the drop-down list.
6.
Click the
Apply New Settings button
to accept the changes, or the
Restore Settings button
to return
the settings to their previous values.
NOTE: Changes to settings are not applied until you restart the Printer. A remote
Reboot
button is available on
the
Status Tab
of Internet Services.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/N5_0_EnetSpeed.htm [9/4/03 8:33:15 AM]
Summary of Contents for WorkCentre M24 Color
