NetBIOS over IP Peer to Peer Printing
button for Obtaining an IP Address Automatically from the DHCP Server. If using Static TCP/IP
Addressing, select the radio button marked Specify an IP Address, and enter in the required IP
Address, Subnet Mask, and Gateway addresses for this workstation. Click
OK
when done.
3.
Select the
Services
tab and verify that the
Workstation
service is installed. This is the NT workstation's
client for communicating on Microsoft Networks using the SMB protocol.
Note: If the Workstation service is NOT loaded, click the
Add
button, select
Workstation
from the
available list, and click
OK
. If the setup program fails to find the required files, you will have to click
Have Disk…
to load the service from the Operating System installer disk for this workstation.
4.
Click the
DNS Tab
and make sure that the workstation has a
Host Name
entered into the Host Name
text entry box. Optionally enter in the Domain in which this Host resides into the Domain text box
(xerox.com, for example). Optionally use the Add… button to enter in DNS Server IP Addresses for the
DNS Service Search Order.
5.
Click on the
WINS Address Tab
and verify that the "Enable DNS for Windows Resolution" checkbox is
checked (the preferred method for resolving host names to IP addresses on TCP/IP networks).
Note: If you are operating a Windows Internet Naming Service (WINS) Server on an NT only network,
you might alternatively wish to deselect the "Enable DNS for Windows Resolution" checkbox and supply
the IP addresses of a Primary (and Secondary, if used) WINS Server.
Add the Printer to the Windows NT4 Desktop
1.
From the
Start
menu, select
Settings
and then
Printers
.
2.
Double-click
Add Printer
.
3.
When the Add Printer Wizard displays, select
Network Printer
.
4.
Select
Browse
to search for the printer's
Workgroup
over the Microsoft network.
5.
Select the plus symbol (+) to the left of
Entire Network
to expand it if necessary.
6.
Double click the name of the
Workgroup
for the printer as shown on the Settings List. Select the
SMB
Host Name
as shown on the Settings List. Click
OK
, then click
Next
.
7.
You will be prompted for a print driver. Select
Have Disk
and browse to the location of your print
drivers.
8.
Select the
.INF
file and click
Open
.
9.
When the "Install from Disk" screen displays, verify that the path and file name are correct and click
OK
.
10.
Select the model that corresponds to your Printer and click
Next
.
11.
At the next dialog, enter a name for your Printer and select either Yes or No for making this printer your
default Windows printer. Select
Yes
if you will be printing primarily to this printer from your Windows
applications. Click
Next
.
12.
Select
Yes
to print a Test Page.
13.
Select
Finish
and verify that the Test Page printed out at the Printer.
Configure the Print Driver
1.
From the
Start
menu, select
Settings
and then
Printers
.
2.
Right click on the Printer's icon and select
Document Defaults
.
3.
Select the correct paper size and any other default settings you wish to set for the printer.
An Alternate Procedure for Setting up NetBIOS over IP Peer to Peer Printing
EXPERIENCED SYSTEMS ADMINISTRATORS can use the following procedure:
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/D7_NetBIOS_PeertoPeer.htm (3 of 4) [9/4/03 8:32:55 AM]
Summary of Contents for WorkCentre M24 Color
