6a3 - NetBIOS over IP Peer to Peer Printing
Step 6
...continued
NetBIOS over IP Peer to Peer Printing
Before You Start
1.
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the CD-
ROMs that came with your Printer. They are also typically available for downloading in self-extracting
Zip file format from the Internet at
www.xerox.com
.
2.
Print a
Settings List
as stated under the
Network Connectivity Tab
of this guide.
3.
On the Settings List,
verify that "SMB" is enabled
. Also,
verify that TCP/IP is enabled
as one of the
supported protocols (NetBEUI may also be displayed). Verify that the
workgroup's default name is
Workgroup
,
or a valid, 15 character maximum, workgroup name. Also note the
Printer's SMB Host
Name
(which assures the uniqueness of the Printer's name within the Workgroup). To enable "SMB," if
required, follow the procedure stated under the Microsoft (NetBIOS over IP) item of the NOS Selection
menu, accessed from the
Network Connectivity Tab
of this guide. To modify the name of the
Workgroup, or Printer's name (SMB Host name) within the workgroup, use your workstation's Web
browser to access the Internet Services (Web Pages) residing in the Printer, as described under the
Configure SMB menu item, under the
Internet Services Tab
of this guide.
4.
Make sure to configure the DNS/WINS Server(s) for NetBIOS name to IP address resolution. Then
provide the Printer with the addresses of the Servers as stated in the
Configure TCP/IP Settings
procedure of the Internet Services section of this guide.
Quick Find Printer Driver Installation for:
Windows 95/98/Me Workstation
Windows NT4 Workstation
Windows 95/98/Me Workstation Print Driver
Installation
Verify that the Correct Protocols and Services are installed in the workstation
1.
At the Workstation's Desktop, right-click the
Network Neighborhood
icon ("My Network Places" in
Windows Me) and select
Properties
.
2.
On the
Configuration Tab
, verify that
Client for Microsoft Networks
is installed. If it is NOT, click the
Add
button, select
Client
, select
Add
, select
Client for Microsoft Networks
, and click
OK
. If the setup
program fails to find the required files, you will have to click
Have Disk…
to load the client from the
Operating System installer disk for this workstation.
3.
On the
Configuration Tab
, verify that the TCP/IP protocol is installed. If it is NOT, click the
Add
button,
select
Protocol
, select
Add
, select
TCP/IP Protocol
, and click
OK
. If the setup program fails to find the
required files, you will have to click
Have Disk…
to load the protocol from the Operating System
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_6a3.htm (1 of 4) [9/4/03 8:32:43 AM]
Summary of Contents for WorkCentre M24 Color
