Setting PDL Emulations
Setting PDL Emulations
N3.3
To set the PDL (Page Description Language) Emulations, used by the Printer's Input Ports, perform the
following steps:
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
button or Tab.
3.
Click the third File folder in the Properties Tab directory tree, labeled
Emulation Settings
.
4.
Click on the
Print Mode
hot link to access a List of the Printer's Input Ports, displaying the Page
Description Language emulations they are currently using.
5.
Depending upon the Ports enabled at the Printer, the list of displayed Ports includes: Parallel, AppleTalk
(with PostScript), SMB, NetWare, LPD, IPP and Port 9100. Typical Page Description selections for each
Port include: Autoselect, PostScript, HP-GL/2, PCL and TIFF.
6.
Make your required setting changes, and click the rectangular
Apply New Settings
button to have the
printer register the changes. To return settings to their previous values, without making changes, click
the
Restore Settings
button.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/N3_3_PDL.htm [9/4/03 8:33:15 AM]
Summary of Contents for WorkCentre M24 Color
