Xerox WorkCentre 5945, User'S Manual And Warranty

Page: 380 / 722

Print WorkCentre
®
5945/5955
378 User Guide
Folding and Stapling Booklets using the PostScript Print Driver
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Depending on the optional finishing device and kits installed you will have the choice of different
output options such as stapling, folding and collating.
Note: This option must be made available by your System Administrator.
The options available from your print driver depend on how your System Administrator has
configured the print driver on your computer.
Use the Booklet Fold and Staple option to have the device automatically reduce and arrange the
pages of your original in the correct sequence to form a booklet when the pages are folded in half
- and to fold and staple the pages automatically when they are printed.
1. Open the document to be printed. From most applications select the Office button or select
File , then select Print from the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Select the Xerox PS driver from the list of print drivers available.
4. Open the print driver Properties window - the method will vary depending on the application
you are printing from. From most Microsoft applications select the Properties or Preferences
button to open the window.
5. If required, click the Printing Options tab. This is usually the active tab when the print driver
opens.
6. Select Booklet Creation... from the Finishing menu .
7. Check the Booklet Fold and Staple radio button .
8. If required, click the Booklet Adjustments button to specify precise layout options.
• Select the Imposition Source option required.
-
Imposed By Driver automatically arranges the pages of your original in the correct
sequence to form a booklet when the pages are folded in half.
- Pre-Imposed By App lets the application you are printing from determine the correct
page sequence to form a booklet when the pages are folded in half. Most desktop
publishing applications can create a booklet layout.
• Select the Booklet Paper Size option required.
-
Use Job Setting creates the booklet using the paper size selected in your source
document.
- Manual activates a dropdown menu where you can select the paper size required.
• Select Standard from the Booklet Margins menu to create a margin between each image
on your booklet.
• If required, select None to cancel any programming you have made.
• Select the Gutter entry box and use your keyboard to enter a width for the center margin
of your booklet.